Baño de carga de placas con ventilación cerrada y sistema de alta capacidad

Technical instruction:

1. In the plate charging bath, it adopts full closed ventilation method, so the wind loss is less and it can prevent the leakage of acid fume.

2. The tank material is PP, thickness is 15mm.

3. There are two inner lines of formation tank in one line, each line is 11M length.

4. En la parte superior del tanque, hay un túnel de viento de doble succión y una tabla de puertas, utilizada para la recolección de humos, ambos están hechos de PP de 5 mm, la tabla de puertas adopta refuerzo de flexión, sin deformación durante el uso.

5. The water tank is equipped with rib reinforcement, the edges are flat and there is no leakage in the whole tank.

6. The formation capacity is 10000 big panels daily.

7. The dimension of formation tank is 540*260*435, each line contain 70 pcs tank.

In base of 20 hours formation process, it needs 5 lines for 10000 panels.

8. Under the bottom of this device, it requires anticorrosion treatment on the base.